The Easy Solutions To All Stihl ms500i Problems

Stihl ms500i problems are listed here. The Stihl 500i is a powerful and versatile trimmer that can be used for a variety of different tasks. However, like all trimmers, it can sometimes encounter problems. Fortunately, most of the time, these problems can be easily fixed with a few simple solutions.

Stihl ms500i Problems

We’ll give you some tips on how to fix common Stihl ms500i problems. If your Stihl ms500i won’t start, the first thing you should check is the fuel mix. Make sure that you’re using the correct fuel mix for your model of Stihl ms500i.

Hot Start 

stihl ms500i problems

Check the spark plug- If the spark plug is dirty or fouled, it could be the reason why your Stihl ms500i chainsaw is not starting. Clean or replace the spark plug and see if that solves the problem. Check the air filter- A dirty air filter can also prevent the engine from starting. Clean or replace the air filter and see if that makes a difference. Check the fuel- Make sure that you are using fresh, clean fuel in your chainsaw. Old fuel can cause starting problems. Also, check to see if the fuel mix is correct.

The correct mixture is 50:1 for two-stroke engines. Check for compression- If there is no compression in the engine, it will not start. You can check for compression by removing the spark plug and inserting a thumb over the hole. If you cannot feel any resistance, then there is no compression and you will need to have the engine repaired. Check for a flooded engine- If you suspect that your engine is flooded, open up the carburetor and check for fuel in the cylinders. If there is fuel present, you will need to clean out the cylinders before.

Cutter Wheel Stops

The cutter wheel on a Stihl msi can sometimes stop spinning. This usually happens when the grass becomes too thick or there is something blocking the blade. To fix this, simply turn off the power and remove the obstruction. Then, turn the power back on and resume cutting. If the cutter wheel still won’t spin, it may be necessary to replace it. To do this, first, remove the old cutter wheel by unscrewing it from the motor shaft. Then, screw on the new cutter wheel and tighten it in place. Finally, turn on the power and test the new cutter wheel to make sure it’s working properly.

Loud Noise 

One of the most common problems with the Stihl ms500i is that it makes a loud noise when it is turned on. This can be extremely annoying and can even cause hearing loss if you are not careful. There are a few different things that you can do to try and reduce the noise that your saw makes. One of the easiest things to do is to simply wear earplugs while you are using them. This will help to muffle the sound and will make it much more tolerable.

Another thing that you can do is to make sure that you are using the correct blade for the job. If you are using a blade that is too small, it can cause the saw to vibrate and make more noise. Make sure that you consult the owner’s manual for your saw so that you know what size blade to use. If you are still having trouble with noise, you may want to consider taking your saw to a professional to have them take a look at it. They may be able to identify the problem and offer some solutions that will help to reduce the noise level.

Slow Wheels 

If your Stihl msi chainsaw is having trouble starting up, it might be due to a problem with the carburetor. If the carburetor is dirty, it can prevent the engine from getting enough fuel. Cleaning the carburetor is a fairly easy task that you can do at home. Another common problem with Stihl chainsaws is that the chain may come off while you are using it. This can be dangerous and cause serious injury. To prevent this from happening, make sure that you keep the chain tight and properly tensioned.

You should also check the chain regularly for wear and tear. If your Stihl chainsaw starts to smoke, it could be due to an oil leak. Check the seals and gaskets around the engine to see if they are damaged. If they are, you will need to replace them. If your Stihl chainsaw is vibrating excessively, it could be due to a problem with the spark plug.

No Water Supply

First, check the water supply to make sure it is turned on and that there is enough water pressure. If the problem persists, try flushing the system with fresh water. You can also try using a garden hose to directly supply water to the unit. If none of these solutions work, you may need to call a technician for assistance. If your Stihl msi’s nozzles are clogged, you can easily clean them with a brush or compressed air. First, remove the nozzle from the unit and then use a brush or compressed air to remove any debris that may be blocking the nozzle.

How many horsepower does a Stihl 500i have?

Stihl is a trusted name in the power tool industry, and their msi 500i model is a great option for those who need a powerful and reliable chainsaw. This model has a lot of features that make it a good choice for both home and professional use. One of the most important things to consider when choosing a chainsaw is the engine size. The Stihl 500i has a 50cc engine that produces 3 horsepower. This is plenty of power for most tasks, and it will be able to handle even the toughest jobs.

If you are looking for a chainsaw that is easy to use, the Stihl 500i is a great option. It has an automatic oiler that keeps the chain lubricated, and it also has an electronic ignition that makes starting the saw easy. The Stihl 500i also comes with a carrying case and a manual, so you can keep everything organized and tidy. This saw also has a warranty, so you can be sure that it will last for years to come.

How do I reset my Stihl MS 500i?

It’s easy to reset your Stihl MS 500i by following these simple steps: Turn off the saw and disconnect the spark plug boot. Remove the air filter cover and clean out any debris that may be blocking the airflow. Open the fuel tank cap and unscrew the high-speed adjustment knob until it is in the “L” position.

Insert a small flathead screwdriver into the hole on the side of the carburetor and turn it clockwise until it stops. Reconnect the spark plug boot and turn on the saw. Push the throttle trigger all the way in and hold it for about 10 seconds before releasing it.

How much is a Stihl MS 500i?

Try refueling the machine and checking the battery. If the battery still doesn’t work, you may need to replace it. The mower won’t start. There may be something blocking the spark plug or the engine may be dirty. Clean the engine and check for sparks when you try to start it. If nothing works, you may need to replace the engine. The blades don’t seem to be cutting properly. The blades may be dull or there may be debris on the blade that’s preventing it from cutting properly.

How much does a Stihl MS 500i weight?

First, make sure that the fuel is correctly inserted into the engine. Second, be sure to tighten the spark plug properly. Third, check that the air filter is clean and free of debris. Fourth, make sure that the blade is sharp. Fifth, ensure that the oil level is correct. Sixth, check for any obstructions in the exhaust system. Seventh, clear any debris from around the cutting deck or chipper shell. Eighth, adjust the handlebar height and steering wheel angle to fit your needs.

Make sure that the carburetor is adjusted and that the sparkplug is clean. Also, check the oil level and replace it if necessary. If you still have problems, it might be time to take it in for repair. Contact a qualified technician for help.

What CC is a Stihl MS 500i?

Stihl MS500i is a gas-powered chainsaw. It is a powerful saw that can be used to cut through trees, logs, and other materials. CC is a component of your chainsaw that helps to keep the chain clean. If CC isn’t working properly, your saw may not be able to cut through materials as easily. Here are some tips to help solve any problems you are experiencing with your Stihl MS 500i: Check to see if the chain is too worn out. If the chain is too worn out, it won’t be able to take the pressure from the saw blade. Try to replace the chain every 2 or 3 years depending on how often you use your saw.

Check to see if the chain is properly lubricated. Lubricate the chain every time you use your saw and make sure it’s completely covered by oil. Over time, the oil will wear away and leave metal particles on the chain which can cause problems. 

Is the Stihl ms500i 2 stroke?

Many people are asking if the Stihl ms500i 2 stroke is a good choice for them. The truth is that the ms500i 2 stroke is a great machine for many people. However, there are a few easy solutions to all of your problems. Make sure that you have the correct fuel and oil mix for your machine. All Stihl ms500i 2-stroke machines require a specific fuel and oil mix in order to run properly. If you do not have the correct mix, your machine will not work and you will likely experience problems.

Make sure that you have the correct spark plugs for your machine. The spark plugs are essential for your machine to run properly. If you do not have the correct plugs, your engine will not start, and you will likely experience problems. Check the air filter regularly. The air filter is one of the most important filters on your machine, and it should be checked regularly to ensure that it is clean and effective. If it is not clean, your engine will not run properly, and you will likely experience problems.

How does the 500i compare to the 462?

The Stihl 500i has more power and cutting capacity than the 462, but it also costs more money. If you need a powerful lawn mower that will handle even the most stubborn grass, the Stihl 500i is the model for you. If you are looking for a less expensive option, the Stihl 462 is a good choice.

It has the same power as the 500i, but it costs less money to buy and operate. If you only use your lawn mower occasionally, the 462 may be a better option for you. If you are not sure which model to buy, speak with a salesperson at a local store or contact Stihl customer service. They will be able to help you choose the right lawn mower for your needs.

What chain does the MS500i have from the factory?

Make sure that the screw on each side is tight enough to hold the chain, but not so tight that it damages the chain or housing. Another easy solution is to check for clogs in the chain-sprocket drive system. To do this, remove all of the spark plugs and disassemble the engine. Remove any chunks of wood or metal that may be blocking the sprocket teeth from spinning freely.

The Stihl MS500i saw a lot of popularity when it was released a few years ago. It is a great saw for the price, but there are some common problems that people encounter with it. In this blog post, we will discuss the chain that is typically included with the MS500i from the factory. The chain that is typically included with the MS500i from the factory is a 2-speed transmission chain. This chain is not recommended for use with the MS500i because it is not strong enough. The chain can easily break if you are not careful when using the saw.

Is the Stihl 500i available in Canada?

The Stihl 500i is a high-quality chainsaw that offers a lot of features for the price. It has a powerful engine that can handle most tasks with ease. Additionally, the chain and bar have been designed to last longer than other chainsaws on the market. If you are looking for a chainsaw that can handle most tasks, the Stihl 500i is a great option. You may be able to find it online or at your local store.

It has a powerful engine that can cut through tough timber quickly and easily. It also has a number of safety features that make it a safe chainsaw to use. If you are looking for a chainsaw that is capable of cutting through tough timber, the Stihl 500i is a great option. You can find the Stihl 500i online or at your local hardware store.


If you’re having problems with your Stihl ms500i hedge trimmer, there are a few easy solutions that will help get the machine back in working condition. First and foremost, make sure that you have the correct equipment for the task at hand. If you don’t have the right tool for the job, it’s going to be difficult to repair or fix anything. Second, try cleaning everything out of the machine – from the air filter to the spark plug – before trying to start it up again. Finally, if all else fails and you still can’t get your machine running properly, please feel free to contact one of our team members for assistance.