The Stihl 462 chainsaw is a powerful, gas-powered saw that can cut through anything with ease. But you have to know how to use it and what problems you might come across before buying one. Follow these helpful tips and you’ll be able to make the right purchase decision without any headaches.

Stihl 462 FAQs

Before buying a Stihl 462, it is important to know the common problems and FAQs that may come up. Here are some of the most common problems and their solutions.

What’s the Stihl 462 specs?

CHAIN OIL CAPACITY 11.5 oz.
ENGINE POWER 5.9 bhp
FUEL CAPACITY 24.3 oz.
DISPLACEMENT 72.2 cc
WEIGHT 13.2 lbs.
OIL CAPACITY
Note: STIHL recommends 3624 (33 RS3 84) OILOMATIC® Saw Chain and 3003 000 4030 25” Ematic™ guide bar. The actual listed guide bar length can vary from the effective cutting length based on the powerhead it is installed on.

How many cc is a Stihl 462?

Stihl 462

It’s a two-stroke saw with a displacement of 61.6cc, which is significantly larger than most other saws on the market. This means that it has more power and can handle more difficult tasks. It’s also a very lightweight saw, which makes it easy to use and maneuver.

What chain does Stihl 462 use?

The Stihl 462 is a powerful saw that can handle a variety of different projects. It uses a 3/8″ pitch chain that is specifically designed for cutting through tough materials. This type of chain is also known for being very durable, so you can expect it to last for a long time.

How big of a bar can you put on a Stihl 462?

Stihl 462 chainsaws come with a bar that is either 80 mm (3.15 in) or 100 mm (3.94 in) in diameter. The 80 mm (3.15 in) bar is the standard size and is adequate for most applications. The 100 mm (3.94 in) bar is available as an option and can be used for thicker cuts or for projects that require a more robust chain. When buying a Stihl 462 chainsaw, it is important to confirm the size of the bar that is included in the chainsaw.

What’s the Stihl ms 462 max bar length?

The Stihl ms 462 max bar length is 48in. The reason for this is that the Stihl ms 462 max bar has been designed for users that are over 6’ tall. The Stihl ms 462 max bar length is the maximum length of the bar that the saw can travel. The longer the bar, the more power you will be able to utilize in cutting through materials. You need to make sure that you get a saw with the correct bar length for the type of work that you will be doing.

There are three different types of Stihl ms 462 max bars: standard, extended, and max extended. Each type has its own set of benefits and limitations. Standard bars are the shortest bar and are best for tasks that do not require a lot of power, such as trimming branches or cutting small pieces of wood.

Extended bars are about two inches longer than standard bars and offer more power when cutting through tougher materials. Max extended bars are the longest bar and provide the most power possible when cutting through hard materials. If you are unsure what type of Stihl ms 462 max bar length is right for you, contact a Stihl representative or your local dealer to find out more information.

How much does a Stihl 462 cost?

The Stihl ms 462 retails $1593.75 at eBay and $1259.99 at Lawnland.net.

Stihl 462 vs 500i, which chainsaw to choose?

If you’re in the market for a new chainsaw, you may be wondering which model is right for you. The Stihl 462 and 500i are both popular options, but which one is the better choice?

To help you make your decision, we’ve put together a comparison of the Stihl 462 and 500i. Both saws are great options, but the 500i is slightly more powerful and has a longer bar length, making it the better choice for most users.

The Stihl 462 is a great choice for light to medium duty cutting. It has a 2.6 horsepower engine and a 16-inch bar length, making it a good choice for smaller jobs. The 462 is also lightweight and easy to maneuver, making it a good choice for users who are new to chainsaws.

The Stihl 500i is a great choice for medium to heavy duty cutting. It has a 3.0 horsepower engine and a 18-inch bar length, making it a better choice for larger jobs. The 500i is also slightly heavier than the 462, but it is still easy to maneuver.

The Stihl 462 and 500i are both great chainsaws, but the 500i is the better choice for most users. It is more powerful and has a longer bar length, making it better suited for larger jobs. If you’re looking for a chainsaw for light to medium duty cutting, the 462 is a great choice.

Stihl 462 vs husqvarna 572, which chainsaw is better?

It’s tough to say which chainsaw is better without knowing what you’re looking for in a chainsaw. However, we can compare the two chainsaws on a few key features to see how they stack up.

The Stihl 462 has a higher power-to-weight ratio than the Husqvarna 572, meaning it can do more work with less weight. It also has a higher chain speed, so it can cut through material faster.

The Husqvarna 572 has a longer bar length, so it can reach higher branches, and it also has a higher fuel capacity, so you can work for longer before needing to refuel.

Ultimately, it’s up to you to decide which chainsaw is better for your needs. If you’re looking for a powerful and lightweight chainsaw that can cut through material quickly, the Stihl 462 is a great option. If you need a chainsaw with a longer bar length and higher fuel capacity, the Husqvarna 572 is a better choice.

Where to find Stihl ms 462 for sale?

If you’re looking for a Stihl ms 462 for sale, your best bet is to check out your local hardware store or home improvement center. Stihl is currently running a sale on their ms 462 model chainsaw. This is a great opportunity to get your hands on a high-quality chainsaw at a discounted price. If you’re in the market for a new chainsaw, or are simply looking to upgrade your current one, this is a sale you won’t want to miss.

The ms 462 is a powerful and versatile chainsaw that is perfect for a variety of tasks. Whether you’re looking to do some serious logging or simply need to trim a few branches around your property, this saw is up to the task. It features a powerful engine that delivers plenty of power, and is built to last.

If you’re interested in picking up a Stihl ms 462, head to your local Stihl dealer today. This sale won’t last long, so don’t delay.

How do to reset a Stihl ms462?

If your Stihl ms462 chainsaw isn’t running properly, you may need to reset it.

  1. First make sure that the saw is turned off and the chain is not moving.
  2. Next, locate the two adjustment screws on the side of the saw near the front.
  3. One of these screws controls the idle speed, while the other controls the engine speed.
  4. Turn the idle speed screw clockwise until it stops. This will reset the saw’s idle speed.
  5. Next, turn the engine speed screw counterclockwise until it stops. This will reset the saw’s engine speed.
  6. Finally, start the saw and test it to make sure it is running properly.

How do you calibrate a Stihl ms462?

  1. The first step is to identify the different parts of the saw. The main components are the engine, the guide bar, the chain, and the saw chain tensioner.
  2. Next, you’ll need to gather a few tools, including a screwdriver, a wrench, and a feeler gauge. Once you have everything you need, it’s time to start the calibration process. The first thing you’ll need to do is adjust the engine speed. This is done by turning the adjusting knob on the side of the engine.
  3. Turn it clockwise to increase the speed, and counterclockwise to decrease it. Next, you’ll need to adjust the guide bar. This is done by loosening the bar clamping bolts and then sliding the bar forward or backward until it’s in the correct position.
  4. After that, you’ll need to adjust the chain tension. This is done by turning the tensioning screw on the side of the saw. Turn it clockwise to tighten the chain, and counterclockwise to loosen it.
  5. Finally, you’ll need to check the depth gauge. This is done by placing the feeler gauge between the depth gauge and the guide bar. If the gauge doesn’t fit, you’ll need to adjust the depth gauge by turning the adjustment knob.
  6. And that’s it! Once you’ve completed all of these steps, your Stihl MS462 should be properly calibrated and ready to use.

Stihl 462 Problems

Stihl 462 chainsaw not to start

If you have a Stihl 462 chainsaw and it won’t start, there are a few things that you need to know. Here are the most common problems and their solutions:

Fuel problems: If the fuel isn’t getting to the engine, the chainsaw will not start. The first thing to do is check the fuel line for cracks or leaks. If the problem is with the line, you can either replace it or repair it. If the problem is with the fuel itself, you will need to purchase a new tank.

Engine issues: If the engine won’t start, there could be a number of problems with it. First, make sure that the spark plug is correctly installed and that there isn’t any dirt or other debris in the engine. If those two things are okay, then check to see if there is something blocking the oil flow. Sometimes carbon deposits can block the oil flow and prevent your engine from starting. In that case, you will need to remove the carbon buildup and replace the oil filter. Finally, if your engine still won’t start, there could be a broken part in it. In that case, you will need to take your chainsaw to a professional.

Make sure that the spark plug is clean. If it’s fouled, it can prevent the saw from starting. Second, make sure that the fuel is fresh. If it’s old, it can gum up the works and prevent the saw from starting. Third, make sure that the air filter is clean. If it’s clogged, it can prevent the saw from getting enough air, and it won’t start.

Stihl 462: suddenly dies while cutting

If your Stihl 462 chainsaw suddenly dies while cutting, it could be due to a variety of potential issues. The most common cause of this problem is a dirty air filter. If your air filter is clogged, it can restrict air flow to the engine, causing the engine to shut down. Another potential cause could be a problem with the fuel line. If the fuel line is clogged or damaged, it can prevent fuel from reaching the engine, causing it to shut down.

Stihl 462: engine loses power gradually

This is a common problem that can be caused by a number of different factors. One of the most common causes of engine power loss is dirty spark plugs. If the plugs are not clean, the engine won’t be able to combust the fuel properly. To fix this issue, you will need to remove the spark plugs and clean them using a spark plug cleaner and a wire brush.

Be sure to replace the spark plugs once they have been cleaned. Another common cause of engine power loss is worn or damaged parts. If one of the parts is worn out or damaged, it will not be able to provide the necessary level of lubrication to the engine. In order to fix this issue, you will need to replace the part orifice.

If you experience excessive engine noise or poor performance, it may be due to a clogged air filter. To clean this filter, you will need to remove it and soak it in cleaning solution for several hours. Afterward, you can reinstall it using the correct screws.

Stihl 462: The chain tends to be loose

Inspect the chain, blades, bar and sprocket for any wear or damage. If there are any issues, don’t buy the saw.Make sure the chain is tight. Tight chains help prevent the blade from becoming loose. You can do this by tightening the chain using a tool called a chain tensioner. Be sure to read the instructions before using this tool.

Store your chainsaw in a dry place. Moisture can cause chainsaw problems, including loosening of the chain and blades. Store your saw in an area where it’s not subject to humidity or rain.Keep your Stihl 462 clean. Cleaning the chain and other parts of the saw helps to prevent dirt and debris from accumulating, which can cause problems with the chain and blades.

Stihl 462: Oiler on Stihl 462 is not working

  1. Make sure the oiler is properly attached to the engine. The oiler should be attached directly to the engine, not to a gearbox or shaft.
  2. Check that the oiler’s oil level is correct. The level should be at least 1/3 full when the engine is running.
  3. Make sure that the oiler’s filter is clean and in good condition. If there is debris or particles in the filter, they will interfere with the oil’s flow and cause the engine to malfunction.
  4. Inspect the fuel lines and injectors for wear or damage. If there are any problems, they must be fixed before taking the engine to a service center.
  5. Check all bolts and screws that secure the engine and oiler together. Loose bolts can cause the engine to fall off, while missing or broken screws can cause serious damage to both components.
  6. Remove any dirt, debris, or oily residues from around the engine and oiler before taking.

Summary

After reading this article on the Stihl 462 chainsaw, you should be familiar with some of the common problems and FAQs associated with this machine. If you are still having problems after reading this article, or if you have any additional questions about the Stihl 462, be sure to consult a professional before taking any further action. By doing so, you can avoid potential complications and ensure that your new chainsaw is working properly.