STIHL BR 200 blower problems can be frustrating, but fortunately, most of them are easy to fix. Troubles like stalling, starting issues, and clogged air filters can be resolved in a matter of minutes. So, if you’re experiencing any problems with your STIHL BR 200 blower, recognize that they’re likely simple in nature, and the solution could be right at your fingertips.
Brief overview of the STIHL BR 200 blower
The STIHL BR 200 blower is a powerful and reliable outdoor power tool designed to make yard work easier. It features a powerful engine, low-vibration handle, and adjustable air speed for maximum performance. The STIHL BR 200 blower is ideal for cleaning up leaves, grass clippings, and other debris quickly and efficiently.
Common Stihl BR 200 blower Problems
Issue 1: Not starting properly
Here are some of the main reasons why your STIHL BR 200 blower might not be starting properly and what you can do to fix it:
- Dirty air filter: The air filter on your STIHL BR 200 blower needs to be clean in order for it to start properly. If the air filter is clogged with dirt and debris, it will prevent air from entering the engine, which will affect the starting process. To clean the air filter, remove it from the blower and use a soft brush to remove any dirt or debris.
- Old fuel: If your STIHL BR 200 blower has been sitting unused for a while, it’s likely that the fuel has gone bad. The fuel should be replaced with fresh fuel before attempting to start the engine.
- Clogged spark plug: If the spark plug on your STIHL BR 200 blower is clogged, it will prevent the spark from reaching the engine and consequently, prevent the engine from starting. To clean the spark plug, remove it from the blower and use a wire brush to remove any dirt or debris.
- Faulty ignition system: If the ignition system on your STIHL BR 200 blower is faulty, it will prevent the spark from reaching the engine and consequently, prevent the engine from starting. To test the ignition system, use a multimeter to measure the voltage at the ignition coil. If the voltage is too low, the ignition system may need to be replaced.
Issue 2: Problem to running continuously
The STIHL BR 200 blower is one of the most popular and reliable models on the market. However, it can occasionally experience problems with running continuously. Fortunately, there are some easy fixes that can help you get your blower up and running again in no time.
One of the most common issues with the STIHL BR 200 blower is a clogged air filter. This can cause the engine to run too rich and cause it to overheat or even shut down completely. To fix this problem, simply remove the air filter and clean it with compressed air or a vacuum cleaner. Once it’s cleaned, replace it back into the blower and try starting it again.
Another issue that may be causing your STIHL BR 200 blower to run continuously is a dirty spark plug. Over time, dirt and debris can accumulate on the spark plug which can prevent proper ignition of fuel in the engine. To fix this problem, simply remove the spark plug from the blower and clean it with a wire brush or sandpaper. Once it’s been cleaned, re-install it back into the blower and try starting it again.
Finally, if your STIHL BR 200 blower is still having problems running continuously after trying these steps, then you may need to replace some of its parts such as its carburetor or fuel line. If this is necessary, then you should consult an authorized service center for assistance in replacing these parts correctly and safely.
Issue 3: Fuel problem
There are two main types of fuel problems that you might experience with the STIHL BR 200 blower. These include:
- Fuel system blockage: It’s possible for dirt or debris to clog the fuel system, which prevents fuel from reaching the engine. This can cause the blower to run erratically or not start at all.
- Fuel mixture issues: This occurs when the fuel and air mixture in the fuel tank isn’t correct. If there’s too much air or fuel, the blower won’t run smoothly.
To diagnose fuel problems with the STIHL BR 200 blower, you should follow these steps:
- Check the fuel filter: If the fuel filter is dirty or clogged, it can prevent fuel from reaching the engine. You should carefully remove the fuel filter and inspect it. If it’s dirty, you should clean it, or if it’s damaged, replace it with a new filter.
- Check the carburetor: The carburetor is the component that mixes fuel and air. If it’s dirty or damaged, it can cause the blower to run poorly. You should check the carburetor and clean it or replace it if it’s damaged.
- Inspect the fuel lines: Check the fuel lines to ensure they are free of blockages, holes, or cracks, which can prevent fuel from flowing through the engine.
Issue 4: Don’t accelerate
The Stihl BR 200 chainsaw is an incredible tool that can make your work much easier, but it is important to be aware of some of the common issues that come with its use. Dirty and clogged fuel filters can be very damaging to the chainsaw and can cause it to have difficulty running.
To ensure that your Stihl BR 200 is working effectively, you should make sure to regularly clean the fuel filters. Even with a clean air filter, if your blower does not accelerate, you may need to replace the fuel filter and try again.
Issue 5: Insufficient air supply
If you’re noticing a drop in performance from your leaf blower, especially when attempting to blow smaller branches that are angled backward, it could be a sign that the impeller isn’t delivering enough air. To fix this, you should check if the impeller is loose and, if so, tighten it. If the impeller is damaged, however, you will need to replace it.
Issue 6: Extra vibration
The STIHL BR 200 blower is a powerful and reliable piece of equipment, but it can sometimes be prone to extra vibration. This can cause the blower to shake and vibrate excessively, making it difficult to use and potentially damaging the engine. Fortunately, there are some easy fixes that can help reduce this vibration.
The first thing you should do is check the spark plug for any signs of wear or damage. If it looks worn or damaged, then replace it with a new one. Also check the air filter for any dirt or debris that may be blocking airflow. If it’s dirty, clean it out or replace it with a new one. Next, inspect the fuel line for any kinks or blockages. If there are any, straighten them out or replace them with new ones.
Finally, check the carburetor for any clogs or debris that could be causing air flow problems. If there are any issues here, clean them out or replace them with a new carburetor. These simple steps should help reduce vibration in your STIHL BR 200 blower and make it easier to use and maintain over time.
Pros and Cons of STIHL BR 200 blower
- Lightweight: The STIHL BR 200 blower is lightweight and easy to operate, making it a great option for homeowners and professionals alike.
- Powerful: With air velocity of up to 150 mph and air volume of up to 430 cfm, the STIHL BR 200 blower is powerful enough to handle even the toughest jobs.
- Easy to start: The STIHL BR 200 blower features an easy-to-start engine, which means you can get to work quickly without any hassle.
- Comfortable to use: The STIHL BR 200 blower comes with a comfortable harness that distributes weight evenly, which makes it easy to use for extended periods of time.
- Price: The STIHL BR 200 blower is a bit more expensive than some of its competitors, which could be a downside for those on a tight budget.
- Noise: Like most blowers, the STIHL BR 200 blower can be quite noisy, which could be a problem for those who need to use it in residential areas.
- Fuel efficiency: Some users have reported that the STIHL BR 200 blower is not as fuel efficient as they had hoped, which could be a downside for those who need to use it frequently.
How to use STIHL BR 200 blower properly?
Using the STIHL BR 200 blower is relatively easy, but there are a few steps to follow in order to use it safely and efficiently.
- Read the Manual: Before using the blower, it is important to read the instruction manual for the STIHL BR 200 blower. This will provide you with important information about the operation and safety of the blower, as well as troubleshooting tips.
- Preparing the Blower: Before using the blower, make sure the air filter, spark plug, and fuel tank are clean and free of debris. Check the fuel line and fuel filter to make sure they are free of any blockages.
- Starting the Blower: To start the blower, make sure the on/off switch is in the “on” position. Then press the primer button until fuel is visible in the fuel priming bulb. Next, locate the choke lever and pull it out. Finally, press the starter button to start the engine.
- Using the Blower: Once the engine has started, it’s time to use the blower. Make sure the speed control is set to the desired speed. Then, direct the nozzle of the blower to the area you want to clear. When you are finished using the blower, turn off the engine and allow the engine to cool down before storing the blower.
Maintaining Tips about STIHL BR 200 blower
- Change the Air Filter Regularly: The air filter of the STIHL BR 200 blower should be changed regularly to prevent air restriction and reduce engine wear and tear. To replace the filter, remove the filter cover and inspect the old filter for any dirt or debris. If it is dirty, replace it with a new one.
- Check the Spark Plug: The spark plug should be inspected regularly to ensure optimal engine performance. To check the spark plug, remove it from the engine and inspect the electrodes for any signs of wear or damage. If they are worn or damaged, replace the spark plug with a new one.
- Clean the Blower’s Exhaust Port: The exhaust port should be cleaned regularly to prevent clogs and to improve the blower’s performance. To clean the port, remove the spark plug and use a can of compressed air to blow the debris out of the port.
- Clean the Blower’s Air Intake: The air intake should be cleaned regularly to prevent dirt and debris from entering the engine. To clean the air intake, remove the air filter and use a can of compressed air to blow the dirt and debris out of the port.
- Lubricate the Blower’s Moving Parts: The moving parts of the blower should be lubricated to prevent them from wearing out too quickly. To lubricate the parts, use a lubricant designed for small engines. Apply the lubricant to all of the moving parts and allow it to work its way into the parts.
- Sharpen the Blades: The blades of the blower should be sharpened regularly to ensure optimal performance. To sharpen the blades, use a sharpening stone or a file to remove any nicks or burrs. Be sure to use the correct type of stone or file for the type of blade you have.
The STIHL BR 200 blower is an essential tool for outdoor cleaning tasks. Like any machine, though, problems can occur. Of course, troubleshooting mechanical issues can be intimidating, but there’s no need to worry. With the simple fixes outlined in this article, you’ll be able to get your STIHL BR 200 blower back up and running in no time.